L-HM HPC 46 Hydraulic Oil | 200L

Sinopec L-HM HPC Antiwear Hydraulic Oil ISO VG 46 is a premium-quality antiwear hydraulic oil formulated from Group II hydroprocessed base oils with a multifunctional additive system, meeting the performance requirements of leading international hydraulic oil specifications. ISO VG 46 is the most widely specified viscosity grade for industrial and mobile hydraulic systems in the UK, and the L-HM HPC 46 is formulated to meet the full demands of this application range, achieving FZG fail load stage 12, proven Eaton Vickers and Parker Denison pump test performance, NAS 7 cleanliness or better and a TOST oxidation life exceeding 5,000 hours. A technically equivalent alternative to premium ISO VG 46 hydraulic oils from major international lubricant manufacturers, available at a competitive price point with full UK technical support.

The 200L drum is suited to maintenance departments, plant hire operators and industrial facilities servicing multiple hydraulic systems on a scheduled maintenance programme. Better value per litre than the pail and straightforward to dispense using a standard drum pump.

Technical reference: ISO VG 46 Hydraulic Oil

Key Features

• Oxidation stability and service life. Group II hydroprocessed base oils provide inherently superior oxidation resistance compared to Group I mineral oils, resisting varnish and sludge formation across the full range of industrial and mobile hydraulic applications.
• Antiwear protection. FZG fail load stage 12 and proven performance in Parker Denison T6H20C and Eaton Vickers 35VQ25 pump tests protect pumps, valves and actuators against wear across general industrial and mobile hydraulic applications.
• System efficiency. Rapid water separation, fast air release and effective antifoam performance maintain efficient hydraulic power transfer and protect against cavitation-induced wear across a wide range of system pressures and temperatures.
• System cleanliness. NAS 7 cleanliness or better at point of filling reduces solid contaminant ingression risk and extends filter service life across industrial and mobile hydraulic systems.
• Filterability and hydrolytic stability. Good filterability and hydrolytic stability ensure consistent performance and prevent filter blockage across extended service intervals in the most common hydraulic system designs.
• Seal and material compatibility. Compatible with common elastomeric seal materials and paints specified for use with mineral hydraulic oils, providing broad compatibility across industrial and mobile hydraulic equipment.

Applications

Sinopec L-HM HPC ISO VG 46 Antiwear Hydraulic Oil is recommended for the full range of industrial and mobile hydraulic systems operating across moderate to high ambient temperatures. The most commonly specified hydraulic oil grade for general industrial machinery, construction equipment, excavators, cranes, forklifts and mobile plant in the UK. Suitable for vane, gear and axial piston pump systems across manufacturing, agriculture, materials handling, marine and offshore applications. Meets Cincinnati P-70, Parker Denison HF-0, HF-1 and HF-2, Eaton Vickers M-2950-S and DIN 51524 Part 2 (HM) performance requirements.

Comparing ISO VG 46 against a lighter grade? See our technical guide on ISO VG 32 vs ISO VG 46 hydraulic oil. For viscosity grade selection guidance see hydraulic oil viscosity selection explained.

Approvals & Compatibility

Meets or exceeds the following industry specifications:

• DIN 51524 Part 2 (HM)
• ISO 11158 (L-HM)

Meets or exceeds the following OEM specifications:

• Cincinnati P-70
• Parker Denison HF-0, HF-1, HF-2
• Eaton Vickers M-2950-S

All Sinopec lubricants supplied by Sinopec Online are genuine, factory-sealed products backed by full technical support.

Also available in an 18L pail and 1000L IBC.