Fuel and transport surcharge expected
Applied to offset increased UK haulage and fuel costs affecting all deliveries.
UK warehouse dispatch
Orders are fulfilled from our UK warehouse stock with nationwide delivery available. EU customers should contact sales for available shipping options.
Same-day dispatch before 12:00
Orders placed before 12:00 GMT or BST are dispatched the same business day. Orders placed after 12:00 are dispatched the next business day.
Delivery options
Economy and premium pallet delivery services are available. Shipping costs are calculated at checkout based on order size, weight and destination. Pails and smaller units are shipped with UPS. UPS rates are available at checkout and start at £9.
Pallet delivery
Deliveries for drums and IBC containers. Prices are excluding VAT. Economy takes 3 to 4 business days, and premium is our next-day service to most locations.
| Flat Rate Economy | Flat Rate Premium | Delivery Zones | |
|---|---|---|---|
| Zone 1 | FREE | £70 |  |
| Zone 2 | £20 | £80 | |
| Zone 3 | £40 | £90 | |
| Zone 4 | £60 | not available | |
| Zone 5 | £80 | not available | |
| Zone 6 | £160 | not available |
Warehouse collection
Same-day warehouse collection is available by arrangement. Warehouse is open for collection from 8:00 to 16:00 Monday through Friday.
Tracking
All orders include tracking information once dispatched.
EU and Northern Ireland
Please contact sales by phone at +44 020 8068 3444 or email sales@sinopeconline.com to arrange your order and delivery service by quote.
The full shipping policy can be found here.
Hydraulic Oil ISO VG 100 HPC HM AW | 1000L IBC
Sinopec L-HM HPC ISO VG 100 Antiwear Hydraulic Oil is a mineral-based, anti-wear hydraulic oil formulated for industrial and mobile hydraulic systems operating under higher loads, higher operating temperatures, or where larger internal clearances apply. It is intended for applications where ISO VG 100 viscosity is specified, and where wear control, oxidation stability, and corrosion protection are required.
Technical reference: ISO VG 100 Hydraulic Oil
Suitable for hydraulic systems in industrial and mobile equipment where ISO VG 100 viscosity is specified, particularly in warm environments, sustained duty operation, or higher-load service. Always follow the equipment manufacturer’s recommendation for viscosity grade and fluid type.
Performance level aligned with common requirements for HM anti-wear hydraulic oils. This product corresponds with widely used industrial hydraulic oil classifications including ISO VG 100 and GB 11118.1 L-HM hydraulic oil specifications.
In some industrial markets, hydraulic oils are also referenced using YB viscosity designations. The equivalent grade for ISO VG 100 hydraulic oil is commonly referred to as YB N100, indicating an anti-wear hydraulic oil with comparable viscosity characteristics.
OEM approvals and test references can vary by viscosity grade within the L-HM HPC range. Always confirm the correct viscosity grade against the equipment manual and the product data sheet before use.
Performance comparable to Shell Tellus, Mobil DTE, Castrol Hyspin, Chevron Rando, and TotalEnergies Azolla. Confirm suitability against the equipment manual and the product data sheet for the exact specification requirement.
Same-day dispatch available with reliable nationwide delivery.
All Sinopec lubricants supplied by Sinopec Online are genuine, factory-sealed products backed by technical support.
For product selection support, contact Sinopec Online or call +44 020 8068 3444.
Sinopec Online Technical Team
Product Data Sheet: Not available
Safety Data Sheet: Not available
