{"product_id":"utto-wet-brake-oil-sae-10w30","title":"UTTO WET BRAKE OIL SAE 10W30","description":"\u003csection class=\"product-overview-system\"\u003e\n\n\u003cdiv class=\"overview-hero\"\u003e\n\n\u003cdiv class=\"overview-main\"\u003e\n\n\u003cdiv class=\"system-label\"\u003eQATOL \/ PRODUCT CATALOGUE\u003c\/div\u003e\n\n\u003ch4\u003eQATOL LUBRICANT PRODUCT CATALOGUE\u003c\/h4\u003e\n\n\u003cp\u003eThis catalogue presents the Qatol lubricant series supplied by Sinopec Online, structured to support specification-led selection. Products are grouped by lubricant function and family, with grade systems and typical applications indicated to allow rapid confirmation against OEM requirements and operating conditions.\u003c\/p\u003e\n\n\u003cp\u003eChoose a category, select a series, then confirm the viscosity or grade system for your equipment. Series with a link under Technical Resources are listed in the Sinopec Online store. All other series are not yet listed online, so contact Sinopec Online to confirm availability and pack sizes.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"overview-meta\"\u003e\n\n\u003cdiv class=\"meta-block\"\u003e\n\u003cspan class=\"meta-label\"\u003eRANGES\u003c\/span\u003e\n\u003cp\u003eAutomotive, industrial and marine\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"meta-block\"\u003e\n\u003cspan class=\"meta-label\"\u003eSELECTION\u003c\/span\u003e\n\u003cp\u003eOEM approval, grade system and duty cycle\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"meta-block\"\u003e\n\u003cspan class=\"meta-label\"\u003eGRADE SYSTEMS\u003c\/span\u003e\n\u003cp\u003eSAE, ISO VG, NLGI and base number\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"meta-block\"\u003e\n\u003cspan class=\"meta-label\"\u003eSUPPORT\u003c\/span\u003e\n\u003cp\u003e+44 020 8068 3444\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"divider\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"overview-section performance-section\" id=\"engine\"\u003e\n\n\u003cdiv class=\"section-heading\"\u003e\n\u003cdiv class=\"system-label\"\u003eAUTOMOTIVE\u003c\/div\u003e\n\u003ch4\u003eENGINE OILS\u003c\/h4\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"margin:0 0 24px;\"\u003eEngine oils for passenger car, heavy-duty diesel, motorcycle, and gas engine service, selected primarily by OEM approval, viscosity grade, and duty cycle. Formulation focus is on wear control, deposit management, oxidation stability, and compatibility with emissions control systems where applicable.\u003c\/p\u003e\n\n\u003cdiv class=\"performance-grid\"\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eSUPER POWER\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eHeavy-duty diesel engine oils for commercial vehicles, off-highway plant, agricultural machinery, and generator sets, where API category, soot handling, oxidation stability, and piston cleanliness govern selection.\u003cbr\u003eGrades: SAE 5W-30, 10W-40, 15W-40, 20W-50, and monograde SAE 30, 40, and 50, with API CI-4\/SL, CH-4, CF-4, CF, and CD categories by grade.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eSUPER POWER HDX, S, AND ST\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eHeavy-duty diesel engine oils for mixed fleets and for engines fitted with EGR, DPF, and DOC emissions systems, where CK-4 and CJ-4 performance is required alongside backward compatibility.\u003cbr\u003eGrades: SAE 10W-40 and 15W-40, with API CK-4\/SN and CJ-4 (HDX) and API CI-4\/SL and CK-4\/SN (S and ST).\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eSUPER ULTRA PLUS LD\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eSynthetic engine oil for the latest heavy-duty diesel and gasoline engines where low viscosity and CK-4 performance are specified.\u003cbr\u003eGrades: SAE 5W-30 and 5W-40, with API CK-4\/SN.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eSUPER GT\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eDetergent-based passenger car engine oils for petrol and light-duty diesel engines, where sludge and soot control are the selection priorities.\u003cbr\u003eGrades: SAE 5W-20, 5W-30, 10W-30, 10W-40, 15W-40, 15W-50, and 20W-50, with API SL\/CF.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eEXTRA PLUS AND SUPER PLUS\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003ePassenger car engine oils for petrol engines across a range of vehicle makers, where API SN performance and fuel economy are specified.\u003cbr\u003eGrades: SAE 0W-20 to 20W-50 with API SN, including fully synthetic grades.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eTIERRA FS\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eFully synthetic passenger car engine oils for turbocharged and high-output petrol engines requiring low viscosity grades and API SP performance.\u003cbr\u003eGrades: SAE 0W-16, 0W-20, 0W-30, 5W-20, and 5W-30, with API SP.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eSIGMA MCO 4T\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eFour-stroke motorcycle engine oils where wet clutch compatibility is required alongside API SL engine performance.\u003cbr\u003eGrades: SAE 10W-40 and 20W-50, with API SL and JASO MA2.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eCNG ENGINE OILS (CPT AND SPT)\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eOils for spark-ignited CNG, LNG, and LPG engines in trucks and buses, and for natural gas fuelled marine main and auxiliary engines, where ash level, oxidation control, and deposit management influence valve life and drain interval.\u003cbr\u003eGrades: SAE 15W-40 for road engines and SAE 40 for marine engines.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"divider\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"overview-section performance-section\" id=\"hydraulic\"\u003e\n\n\u003cdiv class=\"section-heading\"\u003e\n\u003cdiv class=\"system-label\"\u003eINDUSTRIAL\u003c\/div\u003e\n\u003ch4\u003eHYDRAULIC OILS\u003c\/h4\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"margin:0 0 24px;\"\u003eHydraulic oils for industrial and mobile systems operating under defined pressure, temperature, and cleanliness regimes. Selection is governed by pump design, viscosity at operating temperature, filtration sensitivity, and environmental constraints, with oxidation stability and shear performance influencing service life.\u003c\/p\u003e\n\n\u003cdiv class=\"performance-grid\"\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eREDLINE HYDRO HLP\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eAnti-wear hydraulic oils for industrial and mobile hydraulic systems where pump design, operating pressure, and filtration sensitivity require controlled wear performance, oxidation stability, and sustained cleanliness.\u003cbr\u003eGrades: ISO VG 15, 32, 46, 68, and 100, aligned with DIN 51524 Part 2 (HLP) and ISO 6743-4 (HM) requirements.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eREDLINE HYDRO HVI\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eExtra heavy-duty anti-wear hydraulic oils for systems exposed to wide ambient or operating temperature variation, where viscosity stability supports response, efficiency, and component protection.\u003cbr\u003eGrades: ISO VG 15, 32, 46, 68, and 100, with higher viscosity index targets.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eREDLINE HYDRO ZAF\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eSolvent-neutral, ashless, zinc-free hydraulic oils for systems where zinc-containing additives are restricted or where fine filtration, water separation, and deposit control are critical.\u003cbr\u003eGrades: ISO VG 15, 32, 46, 68, and 100.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"divider\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"overview-section performance-section\" id=\"gear\"\u003e\n\n\u003cdiv class=\"section-heading\"\u003e\n\u003cdiv class=\"system-label\"\u003eAUTOMOTIVE AND INDUSTRIAL\u003c\/div\u003e\n\u003ch4\u003eGEAR OILS\u003c\/h4\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"margin:0 0 24px;\"\u003eGear and driveline oils for enclosed industrial gear drives, automotive axles, and manual transmissions operating under sustained load and shock conditions. Selection depends on gear type, load severity, pitch line speed, and operating temperature, with film strength, micropitting resistance, and thermal stability as primary performance criteria.\u003c\/p\u003e\n\n\u003cdiv class=\"performance-grid\"\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eREDLINE CLP\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eMineral-based extreme pressure industrial gear oils for enclosed gear drives operating under high load and shock conditions, where film strength and oxidation stability influence gear life.\u003cbr\u003eGrades: ISO VG 68, 100, 150, 220, 320, 460, 680, and 1000.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eREDLINE UNISYN CLP\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003ePAO synthetic extreme pressure industrial gear oils for enclosed gear drives exposed to very high or very low temperatures, where viscosity retention and oxidation stability extend service life.\u003cbr\u003eGrades: ISO VG 68, 100, 150, 220, 320, 460, 680, and 1000.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eGEARMAX\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eMultipurpose extreme pressure automotive gear oils for manual transmissions, drive axles, and hypoid gears, where API GL-4 or GL-5 performance is specified for the load severity.\u003cbr\u003eGrades: SAE J306 grades 75W-80, 75W-90, 80W-90, 85W-90, 85W-140, 90, and 140, with API GL-4 and GL-5. SAE 75W-90 is fully synthetic.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eAXLE GEAR OIL\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eAutomotive axle oil for heavily loaded gear sets, where extreme pressure performance and scuffing resistance are required under sustained torque.\u003cbr\u003eGrades: SAE 80W with API GL-5.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"divider\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"overview-section performance-section\" id=\"transmission\"\u003e\n\n\u003cdiv class=\"section-heading\"\u003e\n\u003cdiv class=\"system-label\"\u003eAUTOMOTIVE AND PLANT\u003c\/div\u003e\n\u003ch4\u003eTRANSMISSION FLUIDS\u003c\/h4\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"margin:0 0 24px;\"\u003eTransmission and powershift fluids for passenger car, off-highway, agricultural, and heavy plant drivetrains where friction characteristics directly control clutch engagement and component durability. OEM specification compliance, shear stability, and controlled friction performance define suitability.\u003c\/p\u003e\n\n\u003cdiv class=\"performance-grid\"\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eTRANS TDTO\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003ePowershift transmission and drivetrain fluids for off-highway and heavy plant equipment with wet brakes, where controlled friction and wear protection govern clutch engagement and component durability.\u003cbr\u003eGrades: SAE 10W, 30, and 50 to Caterpillar TO-4.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eSUPER POWER TDTO\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eEngine-oil-based transmission and hydraulic fluids for equipment where an API CF-4 and TO-2 type fluid is specified.\u003cbr\u003eGrades: SAE 10W, 30, and 50.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eUTTO AND WET BRAKE OILS\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eMultifunctional tractor and plant fluids covering transmission, final drive, hydraulics, and wet brakes, including a fully synthetic grade for Volvo WB 102 and John Deere JDM J20C and J20D applications.\u003cbr\u003eGrades: SAE 10W-30 and WB 102, led by OEM specification.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eULTRA TRANS ATF AND TALON CVT\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eAutomatic transmission fluids where transmission design and friction material require a defined specification, covering Dexron III, Dexron VI, SP-IV, Type IID, Type F, and Mercon level requirements, plus a fully synthetic fluid for continuously variable transmissions.\u003cbr\u003eGrades: OEM specification led fluid category, matched to the unit.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"divider\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"overview-section performance-section\" id=\"coolants\"\u003e\n\n\u003cdiv class=\"section-heading\"\u003e\n\u003cdiv class=\"system-label\"\u003eAUTOMOTIVE\u003c\/div\u003e\n\u003ch4\u003eCOOLANTS AND FLUIDS\u003c\/h4\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"margin:0 0 24px;\"\u003eCoolants and service fluids for vehicle and engine maintenance, where freeze and boil protection, corrosion control, and emissions system requirements define the correct product.\u003c\/p\u003e\n\n\u003cdiv class=\"performance-grid\"\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eSUPER COOL AFSC\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eMEG-based OAT antifreeze coolant for engine cooling systems, supplied premixed with water.\u003cbr\u003eGrades: 33% and 50% mixes, supplied in blue, green, and red.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eQ-TEC BRAKE FLUID\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eSynthetic brake fluids with a high boiling point for disc and drum brake systems.\u003cbr\u003eGrades: DOT 3 and DOT 4.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eQATBLUE DEF\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eAqueous urea solution for diesel engines fitted with selective catalytic reduction (SCR) emissions systems.\u003cbr\u003eGrades: DEF (AdBlue type).\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eQATOL FLUSHING OIL\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eSolvent-free, light-viscosity paraffinic oil for removing engine and gearbox deposits during oil service.\u003cbr\u003eGrades: Light-viscosity flushing grade.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"divider\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"overview-section performance-section\" id=\"grease\"\u003e\n\n\u003cdiv class=\"section-heading\"\u003e\n\u003cdiv class=\"system-label\"\u003eINDUSTRIAL AND AUTOMOTIVE\u003c\/div\u003e\n\u003ch4\u003eGREASES\u003c\/h4\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"margin:0 0 24px;\"\u003eGreases for rolling and sliding bearing applications across general industrial, automotive, and specialist duties. Selection is based on operating temperature, speed, load, environmental exposure, and relubrication interval, with thickener type, base oil viscosity, and EP performance determining suitability.\u003c\/p\u003e\n\n\u003cdiv class=\"performance-grid\"\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eQPLEX HT LXG EP\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eLithium-based extreme pressure, high temperature greases for heavily loaded bearings such as those in rolling mills and cement kilns.\u003cbr\u003eGrades: NLGI 2 and NLGI 3.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eQPLEX EP AND QPLEX MP\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eLithium-based multipurpose and extreme pressure greases for bearings and chassis lubrication under moderate to heavy load.\u003cbr\u003eGrades: NLGI 2 (EP) and NLGI 3 (MP).\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eQPLEX SIMPLE LITHIUM\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eLithium greases for general-purpose bearing lubrication.\u003cbr\u003eGrades: NLGI 3.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eQPLEX EP 00 AND QPLEX WRG\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eSemi-fluid lithium extreme pressure greases for centralised lubrication systems, and a wire rope grease that forms a non-drying protective film.\u003cbr\u003eGrades: NLGI 00.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"divider\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"overview-section performance-section\" id=\"industrial\"\u003e\n\n\u003cdiv class=\"section-heading\"\u003e\n\u003cdiv class=\"system-label\"\u003eINDUSTRIAL\u003c\/div\u003e\n\u003ch4\u003eINDUSTRIAL LUBRICANTS\u003c\/h4\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"margin:0 0 24px;\"\u003eIndustrial oils for circulating systems, turbines, compressors, heat transfer, and continuous-duty lubrication points. Performance requirements centre on oxidation stability, water separation, controlled friction behaviour, and material compatibility to support reliability and oil life.\u003c\/p\u003e\n\n\u003cdiv class=\"performance-grid\"\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eNOVA ST\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eTurbine oils for steam and gas turbine lubrication and control systems, where oxidation stability, water separation, air release, and deposit control govern reliability and oil life.\u003cbr\u003eGrades: ISO VG 32 and 46, meeting GEK 32568F.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eNOVA GST\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eAshless, zinc-free turbine oils for gas, steam, and expansion turbines and turbo compressors.\u003cbr\u003eGrades: ISO VG 32 and 46.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eROTO JET\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eMineral-based compressor oils with a high FZG rating, for air compressor crankcases and cylinders, where discharge temperature and duty cycle govern viscosity grade.\u003cbr\u003eGrades: ISO VG 32, 46, and 68.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eROTO UNISYN JET\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eSynthetic compressor oils for air compressors where extended oil life or higher operating temperatures are required.\u003cbr\u003eGrades: ISO VG grades by compressor type.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eTHERM HTF\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eHeat transfer fluids for closed circulation systems, where thermal stability, bulk oil temperature, and system design define suitability.\u003cbr\u003eGrades: Product grade defined by thermal stability and temperature capability.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"divider\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"overview-section performance-section\" id=\"metalworking\"\u003e\n\n\u003cdiv class=\"section-heading\"\u003e\n\u003cdiv class=\"system-label\"\u003eINDUSTRIAL\u003c\/div\u003e\n\u003ch4\u003eMETALWORKING FLUIDS\u003c\/h4\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"margin:0 0 24px;\"\u003eMetalworking fluids for machining processes where lubrication, cooling, and surface finish requirements vary with material, operation severity, and machine design. Selection is process-specific and influenced by fluid stability, maintenance practice, and downstream compatibility.\u003c\/p\u003e\n\n\u003cdiv class=\"performance-grid\"\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eSOLUBLE CUTTING FLUID\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eWater miscible cutting fluid for machining operations where heat removal, fluid stability, and surface finish must be balanced against maintenance practice and material type.\u003cbr\u003eGrades: Concentration range defined by operation and material.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"divider\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"overview-section performance-section\" id=\"marine-lubricants\"\u003e\n\n\u003cdiv class=\"section-heading\"\u003e\n\u003cdiv class=\"system-label\"\u003eMARINE\u003c\/div\u003e\n\u003ch4\u003eMARINE LUBRICANTS\u003c\/h4\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"margin:0 0 24px;\"\u003eMarine lubricants from the Qatol Manta Ray range for propulsion, auxiliary, and power generation engines operating on distillate and residual fuels, where engine design, fuel sulphur level, and operating profile govern product selection.\u003c\/p\u003e\n\n\u003cdiv class=\"performance-grid\"\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eMANTA RAY TPEO\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eTrunk piston engine oils, recirculating lubricants for medium-speed four-stroke engines in propulsion, auxiliary, and power generation duty. The 12-20 BN grades are for distillate fuel, and the 20-55 BN grades are for heavy fuel oil or LNG and heavy fuel oil dual-fuel operation.\u003cbr\u003eGrades: Base number (BN) 12-20 and 20-55, meeting API CF.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eMANTA RAY SO\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eSystem oils, recirculating lubricants for bearings, gears, guides, and piston cooling in low-speed two-stroke crosshead engines, where oil separation from cylinder lubrication is required and contamination control influences oil life.\u003cbr\u003eGrades: Base number (BN) 5-8, with FZG failure load stage 11.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eMANTA RAY MCL\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eMarine cylinder lubricants, once-through lubricants for the pistons, rings, and liners of low-speed two-stroke crosshead engines, where acid neutralisation, detergency, and liner wear control define suitability.\u003cbr\u003eGrades: Base number (BN) 40 for VLSFO, and 70, 100, 140, and 200 for HSFO.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"divider\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"overview-section performance-section\" id=\"grade\"\u003e\n\n\u003cdiv class=\"section-heading\"\u003e\n\u003cdiv class=\"system-label\"\u003eSELECTION\u003c\/div\u003e\n\u003ch4\u003eGRADE SYSTEMS\u003c\/h4\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"margin:0 0 24px;\"\u003eViscosity, consistency, and base number grade systems defining film thickness, energy losses, acid neutralisation, and wear control across lubricant types. Final grade selection is confirmed against performance category, OEM specification, and operating conditions.\u003c\/p\u003e\n\n\u003cdiv class=\"performance-grid\"\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eISO VG\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eIndustrial oils including hydraulic, turbine, compressor, and industrial gear oils.\u003cbr\u003eSelection governed by: Operating temperature, required film thickness, system design, and energy efficiency considerations.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eSAE (ENGINE OILS)\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003ePassenger car, heavy-duty diesel, motorcycle, and gas engine oils.\u003cbr\u003eSelection governed by: OEM viscosity requirement, operating temperature range, emissions system compatibility, and duty cycle.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eSAE J306 (GEAR OILS)\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eAutomotive axle and manual transmission oils.\u003cbr\u003eSelection governed by: Gear type, load severity, operating temperature, and OEM specification.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eNLGI CONSISTENCY\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eGreases for rolling and sliding bearing applications.\u003cbr\u003eSelection governed by: Bearing speed, operating temperature, relubrication interval, and grease delivery method.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eBASE NUMBER (BN)\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eMarine trunk piston engine oils, system oils, and cylinder lubricants.\u003cbr\u003eSelection governed by: Engine type, fuel sulphur content, and duty.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eOEM OR APPLICATION-SPECIFIC GRADES\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eTransmission fluids, powershift fluids, coolants, brake fluids, and specialist applications.\u003cbr\u003eSelection governed by: OEM specification, friction behaviour, material compatibility, and regulatory approval.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"divider\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"overview-section performance-section\" id=\"applications\"\u003e\n\n\u003cdiv class=\"section-heading\"\u003e\n\u003cdiv class=\"system-label\"\u003eSELECTION\u003c\/div\u003e\n\u003ch4\u003eAPPLICATIONS\u003c\/h4\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"margin:0 0 24px;\"\u003eApplication mapping based on equipment type and operating environment, aligning viscosity grade, additive system, and performance category with load, temperature, contamination risk, and OEM requirements to maintain reliability.\u003c\/p\u003e\n\n\u003cdiv class=\"performance-grid\"\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eINDUSTRIAL HYDRAULICS AND MOBILE HYDRAULICS\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eCorrect ISO VG for operating temperature, anti-wear performance, cleanliness for valves and servo components, water separation, and oxidation control.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eFLEET DIESEL ENGINES\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eAPI and ACEA category matching, soot handling, oxidation stability, piston cleanliness, and compatibility with emissions systems.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003ePASSENGER CAR ENGINES\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eOEM approval matching, viscosity grade selection, deposit control, wear protection, and fuel economy performance where required.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eENCLOSED GEAR DRIVES AND GEARBOXES\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eCorrect ISO VG for pitch line speed and temperature, EP performance where load demands it, and water separation.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003ePOWERSHIFT TRANSMISSIONS AND FINAL DRIVES\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eFriction control for clutch performance, shear stability, wear protection, and correct TO-4 type performance for the equipment.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eTURBINES AND COMPRESSORS\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eCorrect ISO VG, oxidation stability, water separation, air release, and compressor type or turbine OEM requirements.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eBEARINGS AND GENERAL GREASING\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eNLGI grade selection for speed and temperature, thickener selection for water resistance and stability, and EP performance where shock loads exist.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"performance-item\"\u003e\n\u003cdiv class=\"performance-title\"\u003eMARINE PROPULSION AND AUXILIARY ENGINES\u003c\/div\u003e\n\u003cdiv class=\"performance-copy\"\u003eBase number matched to fuel sulphur level, engine type, and duty, with the correct product type for trunk piston, system, or cylinder lubrication.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"divider\"\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"overview-section resources-section\" id=\"technical\"\u003e\n\n\u003cdiv class=\"section-heading\"\u003e\n\u003cdiv class=\"system-label\"\u003eTECHNICAL SUPPORT\u003c\/div\u003e\n\u003ch4\u003eTECHNICAL RESOURCES\u003c\/h4\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"margin:0 0 24px;\"\u003eProduct pages provide technical data, specification statements and documentation where available. Where an application requires a specific approval or performance category, verify selection against the product page for the exact grade and pack size. When contacting us, include the equipment type, the OEM-specified viscosity grade, operating temperatures and any required specifications or approvals.\u003c\/p\u003e\n\n\u003cdiv class=\"resources-grid\"\u003e\n\n\u003ca href=\"\/search?q=Qatol+Redline+Hydro\"\u003e\n\u003cspan\u003ePRODUCT RANGE\u003c\/span\u003e\nBrowse Qatol Hydraulic Oils\n\u003c\/a\u003e\n\n\u003ca href=\"\/search?q=Qatol+Super+Power\"\u003e\n\u003cspan\u003ePRODUCT RANGE\u003c\/span\u003e\nBrowse Qatol Diesel Engine Oils\n\u003c\/a\u003e\n\n\u003ca href=\"tel:+442080683444\"\u003e\n\u003cspan\u003eSPEAK TO SALES\u003c\/span\u003e\n+44 020 8068 3444\n\u003c\/a\u003e\n\n\u003ca href=\"mailto:sales@sinopeconline.com\"\u003e\n\u003cspan\u003eEMAIL SALES\u003c\/span\u003e\nsales@sinopeconline.com\n\u003c\/a\u003e\n\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003c\/section\u003e\n\n\u003cstyle\u003e\n\n.product-overview-system {\n  max-width: 1180px;\n  margin: 0 auto;\n  padding: 8px 0 10px;\n  background: #fff;\n  color: #111;\n}\n\n\/* TYPOGRAPHY *\/\n\n.product-overview-system h4 {\n  margin: 0;\n  font-size: 11pt;\n  font-weight: 600;\n  letter-spacing: 0.08em;\n  text-transform: uppercase;\n  line-height: 1.4;\n}\n\n.system-label,\n.meta-label,\n.performance-title,\n.resources-grid a span {\n  font-size: 10px;\n  letter-spacing: 0.12em;\n  text-transform: uppercase;\n  opacity: 0.68;\n}\n\n.product-overview-system p,\n.performance-copy,\n.applications-grid div,\n.resources-grid a {\n  font-size: 13px;\n  line-height: 1.8;\n  color: #2f2f2f;\n}\n\n\/* HERO *\/\n\n.overview-hero {\n  display: grid;\n  grid-template-columns: 1.4fr 0.7fr;\n  gap: 70px;\n  align-items: start;\n}\n\n.overview-main {\n  display: flex;\n  flex-direction: column;\n  gap: 18px;\n  max-width: 760px;\n}\n\n.overview-main p {\n  margin: 0;\n}\n\n.overview-meta {\n  display: flex;\n  flex-direction: column;\n  gap: 28px;\n}\n\n.meta-block {\n  display: flex;\n  flex-direction: column;\n  gap: 8px;\n}\n\n.meta-block p {\n  margin: 0;\n}\n\n\/* SECTION DIVIDERS (light grey, one per section) *\/\n\n.product-overview-system .divider {\n  display: block;\n  height: 1px;\n  background: #e4e4e4;\n  margin: 40px 0;\n}\n\n\/* SECTION HEADINGS *\/\n\n.section-heading {\n  display: flex;\n  flex-direction: column;\n  gap: 6px;\n  margin-bottom: 24px;\n}\n\n\/* PERFORMANCE *\/\n\n.performance-grid {\n  display: grid;\n  grid-template-columns: repeat(2, 1fr);\n  gap: 34px 50px;\n}\n\n.performance-item {\n  display: flex;\n  flex-direction: column;\n  gap: 10px;\n}\n\n\/* APPLICATIONS *\/\n\n.applications-grid {\n  display: grid;\n  grid-template-columns: repeat(2, 1fr);\n  gap: 4px 50px;\n}\n\n.applications-grid div {\n  padding: 6px 0;\n  font-size: 13px;\n  letter-spacing: 0;\n  text-transform: none;\n}\n\n\/* RESOURCES *\/\n\n.resources-grid {\n  display: grid;\n  grid-template-columns: repeat(2, 1fr);\n  gap: 16px;\n}\n\n.resources-grid a {\n  display: flex;\n  flex-direction: column;\n  gap: 8px;\n  padding: 18px 20px;\n  background: #f6f6f6;\n  text-decoration: none;\n  color: #2f2f2f;\n  transition: background-color 0.2s ease;\n}\n\n.resources-grid a:hover {\n  background: #ececec;\n}\n\n.resources-grid a:focus-visible {\n  outline: 2px solid #111;\n  outline-offset: 2px;\n}\n\n\/* MOBILE *\/\n\n@media (max-width: 900px) {\n\n  .overview-hero,\n  .performance-grid,\n  .applications-grid,\n  .resources-grid {\n    grid-template-columns: 1fr;\n  }\n\n  .overview-hero {\n    gap: 40px;\n  }\n\n  .product-overview-system .divider {\n    margin: 34px 0;\n  }\n\n}\n\n\u003c\/style\u003e","brand":"Qatol","offers":[{"title":"20L","offer_id":59555763093836,"sku":null,"price":59.99,"currency_code":"GBP","in_stock":true},{"title":"208L","offer_id":59555763126604,"sku":null,"price":499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0821\/7618\/0556\/files\/208L-DRUM-159.png?v=1793025088","url":"https:\/\/sinopeconline.com\/products\/utto-wet-brake-oil-sae-10w30","provider":"Sinopec Online","version":"1.0","type":"link"}